You will need:
- canvas or other fairly hardwearing light coloured fabric. I used lightweight canvas because I had plenty left over from the tepee construction.
- a square each of red, orange, yellow and brown felt
- fusible interfacing (bondaweb or similar)
- red thread and natural thread
- polyester toy stuffing - large bag
- cutting tool (I use a rotary cutter and mat), scissors, sewing machine, needle
- First measure and cut your first triangle. Each side is 40cm (about 16 inches).
- Cut around this triangle to cut three more.
You can either cut your felt into flames and log shapes first and then fix them to the fusible interfacing (as I've done in this picture) or you can fuse the interfacing onto the whole sheet of felt and then cut out the shapes (which I did when I was making eight cushions at once). Either way, you get your flame and log shapes with the fusible interfacing on the back.
Peel the backing paper off the interfacing and arrange the flames and logs how you'd like them to make your fire, then iron them through a damp cloth to stick them.
Use the sewing machine and red thread to stitch over the edges of all your felt pieces. This not only stops them from peeling off in the future, but also adds some definition to the fire.
Next, pin the triangles together right sides together (making sure to keep all the fires the same way up) to make a pyramid and stitch with cream or natural coloured thread, leaving a small gap on one of the bottom edges to turn the right way out.
Turn the pyramid the right way out, stuff and then overstitch to close the gap.
Et voila! A cosy campfire cushion to inspire creative play and just to look gorgeous around the home or garden.